Browse all practice questions for the SkillsUSA District Welding Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

SkillsUSA District Welding Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is a typical electrical stick-out for FCAW-SS welding?
  • Chopper Technology is most closely related to which power concept?
  • Which is not recommended for FCAW welding?
  • What type of power source is proper for GTAW?
  • Which polarity has electrons flowing from the tungsten to the work piece?
  • Gas mixture associated with spray transfer on steel?
  • Which polarities are used in SMAW welding?
  • The CGA fitting number 510 is associated with which gas?
  • When switching to Argon/Helium for GTAW, which parameter should be reduced?
  • GTAW of magnesium uses which polarity?
  • What is the proper shielding gas flow rate for GTAW application?
  • Cold lap or lack of fusion is generally associated with which arc transfer?
  • What is the proper tungsten stickout length for most GTAW applications?
  • What is not a function of the core elements found in FCAW electrodes?
  • In SMAW welding, what does 'Hot Start' do?
  • Which statement about the suffix in E7018-H4R is correct?
  • Gas mixture generally associated with pulse transfer on steel?
  • When oxy-fuel welding, gases are mixed before exiting the torch in which component?
  • In GTAW, which practice is not recommended when adding filler metal?
  • Which GMAW wire would be the best choice for welding scaled or rusty carbon steel?
  • Which designation includes hydrogen content as part of the code?
  • In ER70S-3, the 70 indicates which property?
  • As a tank depletes with a single stage regulator, what occurs?
  • Which arc transfer mode is commonly associated with welding defects such as cold lap?
  • What type of power source is generally used for FCAW welding?
  • Which of the following is not a variable when FCAW-SS welding?
  • In short circuit transfer, increasing the inductance does what?
  • When changing from Argon to Argon/Helium, what procedure needs adjustment?
  • Which FCAW electrode is a metal cored electrode?
  • What lens shade is recommended for most oxy-fuel cutting applications?
  • Which electrode suffix indicates improved impact properties?
  • What does DC+ stand for in FCAW-GS terminology?
  • Which type of hose is used for acetylene fuel gases?
  • Should alternate fuel cylinders be fully opened during normal use?
  • Which statement is true about 4043 and 5356 filler metals used in GTAW for aluminum?
  • What SMAW rod is known as the 'Code Rod'?
  • What does the "70" stand for in ER70S-3?
  • Which statement about GTAW using alternating current is not true?
  • What does the "E" stand for in ER70S-6?
  • Why is DC+ polarity not commonly used in GTAW?
  • Acetylene cylinders are constructed the same as alternate fuel cylinders?
  • What element is added to the core of FCAW wires to increase impact properties?
  • Which statement is true about FCAW details?
  • As a general rule, what is the minimum argon content for pulse welding?
  • A machine has a duty cycle of 300 Amps at 20%. How long can you weld at 300 Amps continuously before the machine shuts down?
  • Water-cooled GTAW torches generally have how many cables?
  • Which transfer mode is associated with 80% AR/20% CO2 gas blend on steel?
  • GTAW of chrome-moly is performed using which polarity?
  • In the AWS electrode designation E7018-H4R, what does the 'E' stand for?
  • Which device is used to switch at high frequencies in inverter power electronics?
  • If an inverter power supply operates at 20,000 Hz, how fast does a chopper machine operate?
  • CTOD stands for?
  • An IGBT is called what?
  • The industry rating on air-cooled GMAW guns is 60% with which shielding gas?
  • Which statement about acetylene cylinders is accurate?
  • Which is not a function of the coating elements in SMAW electrodes?
  • Oxyfuel cutting is this type of chemical process?
  • Can aluminum be welded with the oxyfuel process?
  • GMAW polarity commonly used is DC+ which is best described as?
  • When using GTAW, which is not an advantage?
  • What is not a benefit to using a low-hydrogen FCAW electrode?
  • One of the primary causes of porosity in GTAW is which of the following?
  • Which electrode is widely recognized as the 'Code Rod'?
  • What electrode is not used to weld vertical down?
  • What is a benefit of copper coated GMAW wires?
  • Chopper technology is similar to which technology?
  • Which welding electrode is described as flat/horizontal only?
  • What is the advantage of long electrical stick-out found in FCAW-SS welding?
  • Which statement is not an advantage of argon vs helium as a shielding gas in GTAW?
  • What is a common cause of tungsten frosting or discoloration?
  • What is generally not an effect of a worn or loose contact tip?
  • What is not an advantage of an inverter power source?
  • What two gases are most commonly used for FCAW-GS welding?
  • Which technology is described as being similar to chopper technology?
  • Notch toughness is on requirements for some structural applications especially those in seismic areas. What does notch toughness do?
  • Which polarities are most commonly used in SMAW welding?
  • Which is not a fix to arc blow?
  • Which statement about regulator sizing is true?
  • The minimum argon content for pulse welding is stated as what percent?
  • For FCAW-SS welding, a typical electrical stick-out is 3/4", which of the following is true about stick-out length?
  • Which statement best links STT to a transfer type?
  • Which charts/graphs are used to properly size regulators?
  • Acetylene storage uses which solvent to dissolve the gas?
  • GTAW of magnesium is done using which polarity?
  • Oxyfuel cutting involves which type of chemical reaction?
  • Chopper Technology is similar to which technology?
  • What does GMAW stand for?
  • Which FCAW electrode is a flat/horizontal only electrode?
  • What does SMAW stand for?
  • Which electrode is commonly associated with improved notch toughness for seismic structural use?
  • Which electrode designation is specifically linked to improved impact properties and is used in structural welding?
  • In GTAW of aluminum, which is not a function of inert shielding gas?
  • What does the '1' in the FCAW classification E71T-1 signify?
  • GTAW of chrome-moly uses which polarity?
  • What type of power source is generally used for GMAW welding?
  • Which statement correctly pairs oxygen with its color and threading?
  • FCAW-GS is generally done with polarity?
  • Which is a function of coating elements in SMAW electrodes?
  • Which statement is true when comparing 4043 and 5356 filler metals used in GTAW of aluminum?
  • FCAW stands for?
  • Silicon and manganese function as which type of additives in GMAW wires?
  • What is the device inside the power supply that changes AC to DC?
  • What type of power source is recommended for SMAW welding?
  • What could be a cause of weld bead undercut/concave weld?
  • In E7018-H4R, the H4 designation indicates what?
  • STT stands for which term?
  • What are the two main types of cutting torches used in oxy-fuel systems?
  • Adding argon to shielding gases for FCAW-GS electrodes is not advantageous because it does not produce which effect?
  • In GTAW filler metal designations such as ER70S-t, what is the most common meaning of the 'R' segment?
  • Which shade is commonly used for lens in oxyfuel cutting tasks?
  • In the classification E71T-1H8, the '1' after the '71' denotes which welding position?
  • The temperature of a neutral oxy-acetylene flame is approximately?
  • Acetylene is dissolved into which substance?
  • All of these can cause flashbacks except?
  • What is not a recommended practice for adding filler metal in GTAW?
  • Which statement about pulse welding is accurate according to the material?
  • Which hose grade is used specifically for acetylene gas?
  • Which statement correctly describes the SMAW power source?
  • Which statement about GTAW using alternating current is not true?
  • What is a possible cause of "worm tracking" when using FCAW-GS wires?
  • Propane uses which CGA fitting number?
  • What element is added to the core of FCAW-SS wires to deoxidize/denitrify the weld?
  • Long electrical stick-out in FCAW-SS welding primarily increases what?
  • In GTAW, inert shielding gas primarily functions to?
  • In the GTAW filler metal ER70S-t, what does the 'R' represent?
  • Which statement about inverter machines compared to conventional machines is correct according to the material?
  • Which shielding gas composition is used with FCAW-GS welding to achieve 75% Argon and 25% CO2?
  • In oxy-fuel heating, which gas is commonly preferred?
  • Which statement best describes the AWS R65 designation?
  • Which electrode is commonly chosen for high deposition rates due to a fast-fill characteristic?
  • For improved impact properties, select the correct electrode?
  • Silicon and manganese are added to GMAW wires for what purpose?
  • The industry rating on air-cooled FCAW-GS guns is 60% with what gas?
  • Which FCAW electrode is metal cored?
  • Which statement is not an advantage of GTAW pulse welding?
  • GTAW pulse welding is not advantageous for which outcome?
  • FCAW-SS is generally done with what polarity?
  • What is an effect of too short electrical stick-out when FCAW-SS welding?
  • ER70S-6 is recommended for welding which condition?
  • What is not a type of welding flame?
  • In most inverters, which component is used to increase the frequency of the incoming 50/60 Hz signal to the inverter’s operating frequency around 20 kHz?
  • GMAW is generally done with what polarity?
  • For 1/4 inch steel in GTAW, what is the proper tungsten diameter?
  • An E7014 electrode coating contains what percent iron?
  • In the designation ER70S-6, what does the E represent?
  • What is not an advantage to adding argon to shielding gases for FCAW-GS electrodes?
  • What type of CGA fitting does propane have?
  • Inadequate gas flow can cause what defect in GMAW welding?
  • What determines the voltage when using GTAW?
  • Which electrode designation is commonly chosen to achieve high notch toughness in welds?
  • During spray transfer, increasing inductance does what?
  • In SMAW electrode E7018-H4R, what does the 'R' stand for?
  • Increasing inductance promotes which mode of metal transfer?
  • In the AWS classification, R65, what does the 65 stand for?
  • Which procedure is not recommended for reducing high-frequency emission in GTAW?
  • Which electrode is a fast-fill type?
  • Which statement about E71T-1H8 classification is true?
  • Which of the following gases is not inert?
  • Which shielding gas flow value is commonly used in GTAW?
  • In E71T-1H8, the 'H8' designation stands for how many milliliters of hydrogen per 100 g of weld metal?
  • There are two types of cutting torches. One is an injector torch. What is the other?
  • Gas mixture generally associated with globular transfer on steel?
  • Which transfer mode is associated with 100% CO2 gas on steel?
  • Which tungsten diameter is suitable for 1/4 inch steel welding in GTAW?
  • Which transfer mode is associated with 90% AR/10% CO2 gas blend on steel?
  • For electrode E7024, what does the '2' indicate?
  • Which statement about the E7024 designation is correct?
  • What type of arc transfer is associated with STT?
  • In FCAW-SS welding, which parameter is not considered a variable?
  • Among the alternate fuels, which can also be used for welding?
  • To reduce the risk of hydrogen cracking, which electrode would you select?
  • The core elements added to FCAW electrodes primarily improve which property?
  • What technique is often used with E6010 electrodes?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy